Rubber sheets Tolerance

Our Eaget Group supply a very widely Rubber sheets range of any rubber material :


NR:40-85ShA,3-20Mpa,200-650%elongation,1.1-1.6g/cm3,-75~90C

SBR:45-85ShA,2-10Mpa,200-450%elongation,1.4-1.7g/cm3,-60~100C

NBR:40-85ShA3-20,Mpa ,200-500,%elongation,1.1-1.6g/cm3,-50~120C

Neoprene:50-80ShA,3-10Mpa,200-500%elongation,1.3-1.7g/cm3,-50~120C

EPDM:40-85ShA,3-15Mpa,200-500%elongation,1.4-1.6g/cm3,-60~150C

Butyl:50-80ShA,3-8Mpa,200-500%elongation,1.35g/cm3,-60~150C

Silicon:40-75ShA,6-10Mpa,200-700%elongation,1.2-1.4g/cm3,-120~260C

Viton:70-80ShA,6-8Mpa,100%elongation,1.9g/cm3,-50~300C

 

Major rubber sheets/mats type from our EAGET GROUP :

Commercial Grade Rubber sheets

Many pattern Rubber Mats

Bespoke Rubber sheets of required specification

Sponge rubber sheeet

 10mm sponge rubber sheet50mm thick neoprene rubber sheet-50mm thick CR padsbrown natural rubber sheetsglossy surface NR SBR rubber sheettings

green ESD electric protection rubber matslatex rubber rollsred color coin shaped round dot rubber matyellow sbr rubber blankets


Since all the rubber sheettings are produced by large machine and of industrial goods.

So there are tolerance for the thickness and width,pls kindly check below  :

SOLID RUBBER THICKNESS TOLERANCE

 

 THICKNESS INCHES  TOLERANCE +/-
 1/32 (.032)  .012
 1/16 (.062)  .016
 3/32 (.094)  .016
 1/8 (.125) .020
 3/16 (.187)  .031
 1/4 (.250)  .031
 5/16 (.312  .031
 3/8 (.375)  .047
 1/2 (.500)  .047
 5/8 (.625)  .063
 3/4 (.750)  .093
 1 (1.000)  10%

 WIDTH TOLERANCES FOR SOLID  RUBBER STRIPPING/SLITTING

 MATERIAL  ABOVE  WIDTH (INCHES)  INCLUDING  TOLERANCE
 0  .25  .016
 .25  .50  .025
 .50  1.00  .040
 1.00  2.00  .063
 2.00  4.00  .080
 4.00  8.00  .100
 8.00  16.00  .125
 16.00  32.00  .160

 

For length,we go "+"

ANY INTEREST,PLS DON'T HESITATE TO CONTACT US !